Methods to solve the problem of slow unloading of vibrating feeder
September.27,2024
Main reasons for the vibrating feeder unloading slowly12
Material properties: The material has high viscosity and moisture content, which reduces fluidity and is prone to blockage.
Improper feeding amount: Too much or too little feeding amount will affect the normal operation of the equipment.
Equipment failure: Too little material in the vibrating feeder bin, too large or too small gap between the feeder iron core and the armature, loose bolts, damaged spring plates and connecting forks, damaged eccentric bearings, etc. will all lead to failure to unload.
Insufficient excitation force: The vibration motor has insufficient excitation force, resulting in slow unloading.
Insufficient chute inclination: The installation angle is not suitable, resulting in poor material flow.
Methods to solve the problem of slow unloading of vibrating feeders
Check the material properties: If the material has high viscosity and moisture content, it can be dehydrated and dried to improve the fluidity of the material.
Adjust the feeding amount: Control the feeding amount by adjusting the amplitude and frequency of the vibrating feeder to ensure that the feeding trough is reasonably designed to avoid blockage.
Check equipment failure: Stop the machine to check and repair equipment parts, such as loose bolts, damaged spring plates and connecting forks, etc.
Adjust the exciting force: Increase the exciting force by adjusting the inner and outer eccentric blocks of the vibration motor, ensure that the two vibration motors run in reverse, and ensure that the vibration trajectory of the vibrating feeder is a straight line.
Adjust the inclination of the chute: Adjust the inclination of the chute according to the equipment instruction manual to ensure smooth flow of materials.
